hola luisgarcia
Creo que el Vincentes como tu comentas un amplificador preparado para bicablear.
Aqui tenesi las caracteristicas. Que os parece desde el punto de vista tecnico
Integrated hi-fi amplifier. The electronic circuitry has been developed following the "fully-balanced" design philosophy. In particular the pre-amplifier section is of very high grade as it employs the devices OPA 2134 and OPA 2604 from Burr-Brown. 16 power Amplifiers per channel are taking care of a stunning start-up. The power stage comes equipped with an oversized toroidal core transformer of 2 x 500 Watts plus an energy storage capacity of 40.000 µF per channel. Remote control unit supplied.
Connections: 3 sources and speakers from 4-8 Ohm.
Finish: face plate black or silver.
Technical Specifications SV-233
Amplifier with balanced output and remote control.
Nominal Output Power: 2 x 280 W RMS into 4 Ohm
Nominal Output Power: 2 x 200 W RMS into 8 Ohm
Frequency Range: 20 Hz - 20 kHz +/- 0.5 dB
Input Sensitivity: 260 mV
Total Harmonic Distortion: < 0.1 % (1 kHz, 1 W)
Signal-to-Noise Ratio: > 90 dB
Input Impedance: 47 kOhm
Input: 5 x RCA / 1 x XLR
Output: Record out
Mains Power Input: 230 V / 50 Hz
Dimensions (W x H x D): 430 x 130 x 400 mm
Weight: 17 kg
Colour/Finish: black / silver
www.vincent-tac.de/en/trans/SV_233.htm - 29k ç
Gracias y un saludo
P.d.: estoy probando este modelo que me han dejado (llevo casi cuatro dias y como bien deciais suena igual que mi ETALON EXAMPLI pero con mas potencia (lña caja va mas desahogada). Al pricipio me parecia que el etalon era mas limpio pero a base de probar me he dado cuenta que suenan igual ( lo tengo claro).
![Very Happy :D](./images/smilies/icon_biggrin.gif)